Filter
Top Products
Connect via USB
The default connection type is USB Client
To change the connection type or to verify it is set to USB, select
Start > Settings > Control Panel > PC Connection
Tap the Change button. From the popup list, choose
USB Client
This will set up the mobile device to use the USB port. Tap OK and ensure the check box for “Allow connection with desktop
computer when device is attached” is checked.
Tap OK to return to the Control Panel. If desired, any control panel windows may be closed.
DO NOT PUT THE MOBILE DEVICE INTO SUSPEND WHILE CONNECTED VIA USB. The device will be unable to
connect to the host PC when it resumes operation.
Connect the correct cable to the PC (the host) and the mobile device (the client) as detailed below. USB will start automatically
when the USB cable is connected, not requiring you to select “Connect” from the start menu.
Cables for USB ActiveSync Connection:
9000075CABLE - VX7 Dongle cable provides USB type B connector. Also requires a user provided standard USB cable with
type Aplug for PC/Laptop USB port and type B plug for VX7dongle cable USB type B client port
l D15 connector (labeled as 1 below) connects to the ETHERNET/USB port on the VX7
l Plug the type B end of the standard USB cable plug into the USB host dongle cable (labeled as 4 below).
l The USB type A connector on the standard cable connects to a USB port on a PC or laptop.
l The Ethernet (port #2) and USB client (port #3) connectors on the dongle cable do not need to be connected.
3-23