Honeywell VX7 Mobility Scooter User Manual


 
Bluetooth LXEZ Pairing
The VX7 contains Bluetooth version 2.0 with Enhanced Data Rate (EDR) up to 3.0 Mbit/s over the air. Bluetooth device
connection (or pairing) can occur at distances up to 32.8 ft (10 meters) Line of Sight. The wireless client retains wireless
connectivity while Bluetooth is active.
The user will not be able to select PIN authentication or encryption on connections to from the VX7. However, the VX7
supports authentication requests from pairing devices. If a pairing device requests authentication or encryption, the VX7
displays a prompt for the PIN or passcode. Maximum encryption is 128 bit. Encryption is based on the length of the user’s
passcode.
Bluetooth filtered mode simultaneously supports one printer as a slave Bluetooth device and one scanner, either as a slave or
as a master Bluetooth device.
l The VX7 does not have a Bluetooth managed LED.
l The LED on the Bluetooth scanner illuminates during a scanning operation.
l Barcode data captured by the Bluetooth scanner is manipulated by the settings in the VX7 Scanner Properties control
panel applet.
l Multiple beeps may be heard during a barcode scan using a mobile Bluetooth scanner; beeps from the mobile Bluetooth
scanner as the barcode data is accepted/rejected, and other beeps from the VX7 during final barcode data manipulation.
See also: Start > Settings > Bluetooth
2-10