Filter
Top Products
Message Explanation and/or corrective action Level
Switching to admin-
backdoor
The system is currently in user mode and is now switching to admin mode. The
switch occurred because of the backdoor key presses were entered by the
administrator.
LOG_
PROCESSING
Switching to admin-
hotkey press
The system is currently in user mode and is now switching to admin mode. The
switch occurred because of a hotkey press by the administrator.
LOG_
PROCESSING
Switching to admin-
kbdhook.dll not found
The keyboard hook load failed, so AppLock switches to admin mode. If a password
is specified, the password prompt is displayed and remains until a valid password is
entered.
LOG_
PROCESSING
Switching to admin-
keyboard hook
initialization failure
If the keyboard hook initialization fails, AppLock switches to admin mode. If a
password is specified, the password prompt is displayed and remains until a valid
password is entered.
LOG_
PROCESSING
Switching to admin-
registry read failure
See the explanation of the “Registry read failure” above. AppLock is switching into
Admin mode. If a password has been configured, the prompt will be displayed and
will not be dismissed until a valid password is entered.
LOG_
PROCESSING
Switching to
TaskbarScreenMode
In administration mode, the taskbar is visible and enabled. LOG_EX
Switching to user mode
The registry was successfully read and AppLock is starting the process to switch to
user mode.
LOG_
PROCESSING
Switching to user-hotkey
press
The system is currently in admin mode and is now switching to user mode. The
switch occurred because of a hotkey press by the administrator.
LOG_
PROCESSING
Taskbar hook failure
AppLock is unable to control the taskbar to prevent the locked application from re-
enabling it.
LOG_ERROR
Taskbar hook OK AppLock successfully installed control of the taskbar. LOG_EX
Timeout looking for app
window
After the application is launched, AppLock must wait until the application has
initialized itself before proceeding. The application did not start successfully and
AppLock has timed out.
LOG_ERROR
ToUser after admin, not
at boot
The user mode switch is attempted when the device boots and after the
administrator presses the hotkey. The mode switch is being attempted after a hotkey
press.
LOG_EX
ToUser after admin-app
still open
The switch to user mode is being made via a hotkey press and the administrator has
left the application open and has not made any changes in the configuration.
LOG_EX
ToUser after admin-no
app or cmd line change
If user mode is being entered via a hotkey press, the administrator may have left the
configured application open. If so, AppLock does not launch the application again
unless a new application or command line has been specified; otherwise, it just
locks it.
LOG_EX
Unable to move desktop
The desktop is moved when switching into user mode. This prevents them from
being visible if the application is exited and restarted by the timer. This error does
not affect the screen mode switch; processing continues.
LOG_ERROR
Unable to move taskbar
The taskbar is moved when switching into user mode. This prevents them from
being visible if the application is exited and restarted by the timer. This error does
not affect the screen mode switch; processing continues.
LOG_ERROR
Unhook taskbar wndproc
failure
AppLock could not remove its control of the taskbar. This error does not affect
AppLock processing
LOG_ERROR
Unhook wndproc failure AppLock could not remove the hook that allows monitoring of the application. LOG_ERROR
Unhooking taskbar
In administration mode, the taskbar should return to normal operation, so AppLock’s
control of the taskbar should be removed.
LOG_EX
3-57