Honeywell VX7 Mobility Scooter User Manual


 
802.11b/g and a/b/g Wireless Client
The VX7 has an 802.11x network card that supports diversity with two antennas. The CPU board does not allow hot swapping
the network card. Power management for the network card is configured with the Summit Client Utility.
WEP, WPA and LEAP are supported.
Central Processing Unit
The CPU is a 400MHz Intel PXA255. The operating system is Microsoft Windows CE. The OS image is stored on an internal
SD flash card and is loaded into DRAM for execution.
Input/Output Components
The VX7 supports the following I/O components of the core logic:
l Two 9-pin RS-232 serial ports configured as COM1 and COM3 (labeled "COM2/3"). There is no COM2 port on the VX7.
l Two PCMCIA slots (supporting Type I or II PCMCIA cards).
l One slot for SD memory card.
l CompactFlash (CF) or Secure Digital (SD) drive.
l VMT or standard PS/2 keyboard (via a watertight connector).
l Ports available via dongle cable:
l USB Host port
l USB Client port
l optional Ethernet port
l One audio jack providing monaural audio output.
System Memory
Main system memory is 128MB DRAM.
Video Subsystem
The VX7 video subsystem consists of a color TFT display. The video subsystem complies with the VESA VL bus standard.
The resolution of this display is 800 by 600 pixels. This resolution complies with the SVGA graphics industry standard. The
display can also be configured for 640 x 480 pixels.
The display supports screen blanking to eliminate driver distraction when the vehicle is in motion.
2-8