Filter
Top Products
Bluetooth Indicators
The Bluetooth taskbar Icon state changes as Bluetooth devices are discovered, paired, connected and disconnected.
There may be audible or visual signals as paired devices re-connect with the VX7.
Taskbar Icon Legend
VX7 is connected to one or more of the targeted Bluetooth device(s).
VX7 is not connected to any Bluetooth device.
VX7 is ready to connect with any Bluetooth device.
VX7 is out of range of all paired Bluetooth device(s). Connection is inactive.
Note: When an active paired device enters Suspend Mode, is turned Off or leaves the VX7 Bluetooth scan range, the
Bluetooth connection between the paired device and the VX7 is lost. There may be audible or visual signals as paired
devices disconnect from the VX7.
AppLock, if installed, does not stop the end-user from using Bluetooth applications, nor does it stop authorized Bluetooth-
enabled devices from pairing with the VX7 while AppLock is in control.
Bluetooth Barcode Reader Setup
Please refer to the Bluetooth scanner manufacturer’s User Guide; it may be available on the manufacturer’s web site. Contact
Technical Assistance for Bluetooth product assistance.
Honeywell supports several different types of barcode readers. This section describes the interaction and setup for a mobile
Bluetooth laser scanner or laser imager connected to the VX7 using Bluetooth functions.
Prerequisites
l The VX7 has the Bluetooth hardware and software installed. An operating system upgrade may be required. Contact
Technical Assistance for details.
l If the VX7 has a Bluetooth address identifier barcode label affixed, then Bluetooth hardware and software is installed.
l The mobile Bluetooth laser scanner / laser imager battery is fully charged.
l The VX7 is connected to AC or DC (vehicle) power.
l The barcode numbering examples in this segment are not real and should not be created nor scanned with a Bluetooth
scanner.
l To open the LXEZ Pairing program, tap Start > Settings > Control Panel > Bluetooth or tap the Bluetooth icon on the
desktop or tap the Bluetooth icon in the taskbar.
Locate the barcode label, similar to the one shown above, attached to the VX7. The label is the Bluetooth address identifier for
the VX7.
The mobile Bluetooth scanner / imager requires this information before discovering, pairing, connecting or disconnecting can
occur.
3-76