Filter
Top Products
About the RS-232 Interface
RS-232 Interface
10-3
About the RS-232 Interface
The RS-232 interface allows you to :
• send a nurse call signal
• export trend data to an external PC
WarningWarning
Anyone who connects additional equipment to the signal input port or signal output port
configures a medical system and is therefore responsible to ensure that
the system complies with the requirements of system standard IEC
Standard 60601-1-1. If in doubt, consult Philips Medical Systems
Response Center or your local Philips representative.
Cable
Connections
A 9-pin connector mounted on the rear panel provides the access port for the serial (RS-232)
interface to a suitably configured personal computer. Or, alternatively, qualified service
personnel can use the connector to send a Nurse Call signal. The figure below shows you
where the RS-232 interface is located on the monitor.
PHILIPS IPS C3 PATIENT MONITOR
Manufactured for Philips for
Philips Medical Systems
3000 Minuteman Road
Andover, MA 01810
100-230V~
50-60 Hz.
T1AL 250VT1AL 250V
97008
IPX1
0123
CE
YYYY-XX
100-230V~
50-60 Hz. 1.0A
T1AL 250VT1AL 250V
9700859
IPX1
0123
CE
YYYY-XX
RS-232 Interface