Filter
Top Products
Disassembly Procedures
7-6 Disassembly
Removing the
Keypad on the
Front Panel
Removing the
Optional,
External
Recorder
Step Action
1 The keypad is attached with an adhesive to the front panel. To remove it,
carefully lift up one corner of the keypad with a flathead screwdriver.
2 Peel the adhesive away from the front panel.
Step Action
1 Press the external Paper Eject button on the right hand side of the recorder. The
door drops forward.
2 Remove the paper roll. Two secure screws are visible on the back panel of the
recorder.
3 Use a Philips screwdriver to loosen the two captive screws.
4 Pull the recorder straight out of the side of the monitor by placing your index and
middle fingers in the inside center of the recorder and firmly pulling the recorder
towards you.