Filter
Top Products
Disassembly Procedures
Disassembly
7-9
Replacing the
Speaker
Replacing the
Backlight Tube
The backlight tube is located within the LCD screen. However, you do not need to
disassemble the LCD screen display to replace the backlight tube.
Step Action
1 Use a Philips no. 2 screwdriver to remove the 3 screws fastening the speaker.
2 Pull the speaker up.
Step Action
1 Insert a small, thin, flathead screwdriver into the crevice between the LCD
screen and where the backlight tube slides in.
2 Using the screwdriver, grab the corner of the backlight tube and gently pull the
tube out. Re-insert a new backlight tube.