Filter
Top Products
The GPIB parameter allows the user to enable or disable the IEEE-488 port.
The ADDR parameter allows the user to specify the address of this instrument
on the IEEE-488 bus. The default address is 22 and the range is 1 to 30.
The TERM parameter allows the user to select the termination character trans
-
mitted after each transmission. The default termination character is linefeed
(LF).
7.5.2 Date Time
The DATE TIME function is used for setting the time-of-day clock, time for
-
mat, date, and date format. When this function is selected, the bottom portion
of the display shows the hour, minute, second, time format, day, month, year,
and date format.
The HOUR parameter allows the user to set the current hour (0 through 23).
The MINUTE parameter allows the user to set the current minutes (0 through
59).
The SECOND parameter allows the user to set the current seconds (0 through
59).
The T FORM parameter allows the user to set the time format used for display
-
ing the time. The choices are 12-hour format or 24-hour format.
The DAY parameter allows the user to set the current day (1 through 31).
The MONTH parameter allows the user to set the current month (1 through
12).
The YEAR parameter allows the user to set the current year (1999 through
9999).
73
7 Menu Functions
System Menu
1
24.159C
3
24.142C
2
24.634C
4
24.015C
HOUR: 13
MINUTE: 25
SECOND: 5
DAY: 12
MONTH: 10
YEAR: 2000
D FORM: M-D-YY
T FORM: 24 HR
EXIT
ENTER / MENU UNIT CONTRAST
1529
CHUB E-4 THERMOMETER READOUT
Figure 44 Date Time