Filter
Top Products
7.2.2 Copy Probe
The COPY PROBE function allows you to copy a set of probe parameters from
one channel or memory location to another. The parameters are copied from the
user selected source channel or memory location into the current channel. The
COPY PROBE function can be password protected to restrict access. See Sec
-
tion 7.5.3, Password, for more information. If this function is password pro
-
tected, the user is prompted to enter the password to gain access. If an incorrect
password is entered, the display shows the message PASSWORD INCOR
-
RECT and access is denied. If the correct password is entered or if this function
is not password protected, the bottom portion of the display appears showing
the source channel or memory location, the probe serial number, and the con
-
version type. The destination channel or memory location is displayed after the
source channel type is selected.
Use the LR buttons to select the source channel or memory location. Press
the Enter button to save the new setting. Press the Exit button to cancel and to
exit to the menu.
7.2.3 Test Probe
The TEST PROBE function allows you to test the probe characterization algo
-
rithm and characterization coefficients for a specific probe. The probe and
probe type must be setup in the EDIT PROBE function prior to entering the
TEST PROBE function. When this function is selected, the bottom portion of
1529 Chub-E4 Thermometer Readout
User’s Guide
44
1
24.159C
3
24.142C
2
24.634C
4
24.015C
FROM CH:
PMEMO
SERIAL:
P5
TYPE:
PT100
TO CH:
CHAN1
EXIT
ENTER / MENU UNIT CONTRAST
1529
CHUB E-4 THERMOMETER READOUT
Figure 15 Copy Probe