Filter
Top Products
Subsequent entries in the log consist of the reading number, channel, measure
-
ment value, units, and the time of each entry.
Press the LR buttons to jump 100 readings at a time. Hold the UD buttons
down to advance quickly through the data. Press and hold the L button to
view the top reading, and the R button to view the bottom reading. Press the
Enter or Exit buttontoreturntotheAUTOLOGmenu.
7.4.2.4 Print Data
The PRINT DATA function prints the auto log data for the selected label or for
all labels. The auto log data is printed to the selected port (either serial port or
IR port). When this function is selected, the bottom portion of the display al
-
lows you to select the label of the auto log data or all data and the port. Select
ALL DATA to print all auto log entries, or select a specific label to print only
the auto log data for that label.
Use the LR buttons to select the parameter settings. Use the UD buttons to
scroll between parameters. Press the Enter button to continue. A message is
displayed stating the label of the data to print and the port. Press the Enter but
-
ton to print the data. Press the EXIT buttontocancelandtoexittothemenu.
7.4.2.5 Delete Data
The DELETE DATA function deletes the auto log data for the selected label or
for all labels. When this function is selected, the bottom portion of the display
allows the user to select the label of the auto log session to delete or all data.
65
7 Menu Functions
Logging Menu
1
24.159C
3
24.142C
2
24.634C
4
24.015C
LABEL: ALL DATA
PORT: SERIAL
EXIT
ENTER / MENU UNIT CONTRAST
1529
CHUB E-4 THERMOMETER READOUT
Figure 37 Print Data