*IDN?
HART,1529,A09001,1.11
8.4.8.2 *OPT?
Returns a list of input modules installed.
*OPT?
PRT,TC
Input module types are reported by position, top to bottom, of the two input
modules. The returned example is for a 1529 equipped with one 2-channel PRT
input module and one 2-channel Thermocouple input module.
8.4.8.3 *RST
Sets the instrument operating parameters to defined conditions.
*RST
The following parameters are set when this command is issued.
• Sets the scanning sequence timer to 1 second.
• Sets channel 1 ON and all others OFF.
• Sets the scan mode to SCAN.
• Sets the moving average to 1.
• Sets the printing to all ports OFF.
• Sets the units to C.
• Sets the resolution to AUTO.
•
Stops auto logging.
•
Clears the statistical functions.
8.4.8.4 SYSTem:BOOT:VERSion?
Returns the boot ROM version.
SYST:BOOT:VERS?
0.50
8.4.8.5 SYSTem:CODE:VERSion?
Returns the firmware code version.
SYST:CODE:VERS?
1.11
1529 Chub-E4 Thermometer Readout
User’s Guide
112
