Filter
Top Products
85
Reference Manual
00809-0100-4102, Rev AA
Section 5: Troubleshooting
May 2013
Troubleshooting
Pressure has
Exceeded Limits
The sensor has exceeded the
maximum measurement range.
1. Check process for possible saturation condition
2. Verify that the appropriate sensor was chosen for the
application
3. Reconfirm sensor configuration
4. Reset the device
5. Replace the sensor
Electronics
Temperature has
Exceeded Limits
The electronics temperature has
exceeded the transmitter's
maximum range.
1. Verify environmental temperature is within the
transmitter’s range
2. Remote mount the transmitter away from process
and environmental conditions
3. Reset the device
4. If the condition persists, replace the electronics
Supply Voltage Low The supply voltage is low and may
soon affect broadcast updates.
1. Replace the Power Module
Database Memory
Warning
The device has failed to write to
the database memory. Any data
written during this time may have
been lost.
1. Reset the device
2. Reconfirm all configuration items in the device
3. If logging dynamic data not needed, this advisory
can be safely ignored
4. If the condition persists, replace the electronics
Configuration Error The device has detected a
configuration error based on a
change to the device.
1. Click on details for more information
2. Correct the parameter that has a configuration error
3. Reset the device
4. If the condition persists, replace the electronics
HI HI Alarm The primary variable has surpassed
the user defined limit.
1. Verify that the process variable is within user
specified limits
2. Reconfirm the user defined alarm limit
3. If not needed, disable this alert
HI Alarm The primary variable has surpassed
the user defined limit.
1. Verify that the process variable is within user
specified limits
2. Reconfirm the user defined alarm limit
3. If not needed, disable this alert
Device Status Description Recommended Action