Filter
Top Products
22
Reference Manual
00809-0100-4102, Rev AA
Section 2: Configuration
May 2013
Configuration
2.8 Configuring the LCD display
The LCD Display configuration command allows customization of the LCD to suit application
requirements. The LCD will alternate between the selected items.
In the following instructions, the LCD can also be configured to display configuration
information during the device startup. Select Review Parameters at Startup to enable or
disable this functionality.
Reference Figure 1-2 on page 4 LCD with Local Operator Interface for image of LCD screen.
Configuring LCD display with a Field Communicator
Configuring LCD display with AMS Device Manager
Right click on the device and select Configure.
1. Click Manual Setup, select the Display tab.
2. Select desired display options and click Send.
Pressure Units Sensor Temperature
% of Range Supply Voltage
Scaled Variable
From the HOME screen, enter the fast key sequence
Device Dashboard Fast Keys
2, 2, 5