Filter
Top Products
57
Reference Manual
00809-0100-4102, Rev AA
Section 4: Commissioning
May 2013
Commissioning
4.3 Viewing network status
If the Rosemount 2051 Wireless was configured with the Network ID and Join Key and sufficient
time for network polling has passed, the transmitter should be connected to the network. To
verify connectivity, open the Smart Wireless Gateway’s integral web interface and navigate to
the Explorer page.
This page will display the transmitter’s HART tag, PV, SV, TV, QV, and Update Rate. A green
status indicator means that the device is working properly. A red indicator means that there is a
problem with either the device or its communication path. For more detail on a specific device,
click on the tag name.
4.4 Verifying operation
Operation can be verified in four locations, at the device via the Local Display, using the Field
Communicator, at the Smart Wireless Gateway’s integrated web interface, or by using AMS
Suite Wireless Configurator or AMS Device Manager.
Local Display
The LCD will display the PV value at the same rate as the configured update rate. Press the
Diagnostic button to display the TAG, Device ID, Network ID, Network Join Status and Device
Status screens.
For Device Status screens, see “LCD Screen Messages” on page 73.