Filter
Top Products
106
Reference Manual
00809-0100-4102, Rev AA
Appendix A: Reference Data
May 2013
Specifications and Reference Data
Calibration Certificate
Standard Standard
Q4 Calibration Certificate ★
QG Calibration Certificate and GOST Verification Certificate ★
QP Calibration certification and tamper evident seal ★
Material Traceability Certification
Standard Standard
Q8 Material Traceability Certification per EN 10204 3.1.B ★
Hardware Adjustments
Standard Standard
DZ Digital Zero Trim ★
Software Configuration
Standard Standard
C1
(11)
Custom Software Configuration (Completed CDS 00806-0100-4001 required with order) ★
Gage Pressure Calibration
Standard Standard
C3 Gage Calibration (Model 2051CA4 only) ★
Pressure Testing
Expanded
P1 Hydrostatic Testing with Certificate
Cleaning Process Area
Expanded
P2 Cleaning for Special Service
P3 Cleaning for <1 PPM Chlorine/Fluorine
Pressure Calibration
Expanded
P4 Calibrate at Line Pressure (Specify Q48 on order for corresponding certificate)
Performance
Standard Standard
P8
(12)
High Performance Option ★
Flange Adapters
Standard Standard
DF
(13)
1
/2 -14 NPT flange adapter(s) ★
Vent/Drain Valves
Expanded
D7 Coplanar Flange Without Drain/Vent Ports
Table A-6. 2051C Coplanar Pressure Transmitters Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.