Filter
Top Products
132
Reference Manual
00809-0100-4102, Rev AA
Appendix B: Product Certifications
May 2013
Product Certifications
B.1.5 Ordinary location certification for FM
As standard, the transmitter has been examined and tested to determine that the design meets
basic electrical, mechanical, and fire protection requirements by FM, a nationally recognized
testing laboratory (NRTL) as accredited by the Federal Occupational Safety and Health
Administration (OSHA).
B.1.6 North American certifications
Factory Mutual (FM) approvals
I5 FM Intrinsically Safe
Certificate No: 3045342
Applicable Standards: Class 3600:2011, Class 3610:2010, Class 3810:2005
Markings: Intrinsically Safe for Class 1, Division 1, Groups A, B, C, D
Zone Marking: Class 1 Zone 0, AEx ia IIC
T4 (-40 °C to 70 °C)
Intrinsically Safe when installed according to Rosemount Drawing 03031-1062
Enclosure Type 4X / IP66/68
Specific Conditions for Safe Use:
1. The Model 2051 Wireless pressure Transmitter shall only be used with the 701PGNKF
Rosemount Smartpower Battery Pack.
2. The inline pressure sensor may contain more than 10% aluminum and is considered a
potential risk of ignition by impact or friction. Care must be taken into account during
installation and use to prevent impact and friction.
3. The surface resistivity of the transmitter housing is greater than one gigaohm. To avoid
electrostatic charge build-up, it must not be rubbed or cleaned with solvents or a dry
cloth.
B.1.7 CSA - Canadian Standards Association
I6 CSA Intrinsically Safe
Certificate No: 2526009
Applicable Standards: CSA 22.2 No. 0-M91, CSA C22.2 No. 159-92
Markings: Intrinsically Safe For Class 1, Division 1, Groups A, B, C, D
T4 (-40 °C to 70 °C)
Intrinsically safe when installed according to Rosemount drawing 03031-1063
Enclosure Type 4X/IP66/IP68
B.1.8 European certifications
I1 ATEX Intrinsic Safety
Certificate No.: Baseefa12ATEX0228X
Applicable Standards: EN60079-11:2012, EN60079-0:2012
Markings: Ex ia IIC T4 Ga (-40 °C ≤ Ta ≤ 70 °C)
II 1G
IP66/68
1180