Filter
Top Products
21
Reference Manual
00809-0100-4102, Rev AA
Section 2: Configuration
May 2013
Configuration
2.7.3 Review radio information
To view radio information:
1. From the Home screen, select 1: Overview.
2. Select 7: Device Information.
3. Select 3: Radio.
4. Select from the corresponding number to view each field:
2.7.4 Review operating parameters
The pressure output value in both engineering units and percent of range will reflect the applied
pressure even when the applied pressure is outside of the configured range as long as the
applied pressure is between the upper and lower range limit of the transmitter. For example, if a
Range 2 2051T (LRL = 0 psi, URL = 150 psi) is ranged from 0 to 100 psi, an applied pressure of
150 psi will return a % of range output of 150% and an engineering output of 150 psi.
To view the Operating Parameters menu:
1. From the Home screen, select 3: Service Tools.
2. Select 2: Variables.
The Operating Parameters menu displays the following information pertaining to the device:
1. Process
Pressure
Percent of Range
Last Update Time
Scaled Variable
Enter Fast Update Mode
2. Device
Sensor Temperature
Supply Voltage
Fast Keys
1, 7, 3
1 Manufacturer
2 Device Type
3 Device Revision
4 Software Revision
5 Hardware Revision
6 Transmit Power Level
7 Minimum Update Rate
Fast Keys
3, 2