Filter
Top Products
3-24
COOLANT REPLACEMENT
INSP
ADJ
*****************************************************
CAUTION:
NOTE:
D If coolant splashes in your eyes:
thoroughly wash your eyes with water
and consult a doctor.
D If coolant splashes on your clothes:
quickly wash it away with water and then
with soap and water.
D If coolant is swallowed:
quickly make the person who has swal-
lowed it vomit and then take him to a doc-
tor.
D Hard water or salt water is harmful to en-
gine parts. Use only distilled water if soft
water is not available.
D If you use tap water, make sure it is soft
water.
D Do not use water containing impurities or
oil.
D Take care that no coolant splashes onto
painted surfaces. If it does, wash them
straightaway with water.
D Do not mix different types of ethylene gly-
col antifreeze containing corrosion inhib-
itors for aluminum engines.
9. Tighten:
D Screw (carburetor bleed)
Fill the coolant slowly to the specified lev-
el.
10. Install:
D Radiator cap
11. Start the engine and let it warm up for sev-
eral minutes.
12. Stop the engine and inspect the level.
Refer to “COOLANT LEVEL INSPECTION”
section.
Wait a few minutes until the coolant settles be-
fore inspecting the coolant level.
13. Install:
D Fuel tank
D Side panels
Refer to “COVER AND PANEL” section.