Filter
Top Products
4-36
V-BELT, CLUTCH AND
SECONDARY/PRIMARY SHEAVE
ENG
90 Nm (9.0 mSkg)
NOTE:
NOTE:
NOTE:
7. Install:
SNut
1
(clutch carrier)
Tighten the nut (clutch carrier), using the lock-
nut wrench
3
while holding the clutch carrier
with the rotor holder
2
.
Rotor holder:
90890-01235
Locknut wrench:
90890-01348
8. Install:
SClutch housing
1
SNut
2
(clutch housing)
Tighten the nut (clutch housing), using the
sheave holder
3
.
Sheave holder:
90890-01701
9. Set:
SV-belt
1
Move the V-belt to minimum diameter of the pri-
mary sheave
1
, maximum diameter of the sec-
ondary sheave
2
and make the V-belt tense.