Filter
Top Products
7-36
STEERING
CHAS
NOTE:
NOTE:
YP704010
STEERING REMOVAL
D Securely support the scooter so that
there is no danger of it falling over.
D Stand the scooter on a level surface.
1. Remove:
SHandlebar lower holder
1
SWoodruff key
2
Remove the handlebar lower holder by loosen-
ing the ring nut (upper)
3
gradually.
2. Remove:
SRing nut (upper)
SLock washer
1
SRing nut (center)
2
SRubber washer
3. Remove:
SRing nut (lower)
1
Hold the lower bracket by hand, then remove by
using the exhaust ring and steering nut wrench
2
.
Exhaust and steering nut wrench:
90890-01268
Securely support the steering shaft so that there
is no danger of it falling down.
INSPECTION
1. Wash the bearing and bearing races with a
solvent.
2. Inspect:
SBearings
SBearing races
Pitting/Damage ! Replace.