Filter
Top Products
7-33
HANDLEBAR
CHAS
NOTE:
NOTE:
NOTE:
*****************************************************
*****************************************************
4. Install:
SHandlebar switch (left)
1
Align the handlebar switch mating surface with
the punched mark
a
on the handlebar.
5. Install:
SLever holder (left)
1
Align the lever holder mating surface with the
punched mark
a
on the handlebar.
6. Install:
SThrottle cable
1
SGrip assembly
2
Apply a light coat of lithium soap base grease
onto the inside of the grip assembly and install it
to the handlebar.
7. Install:
SGrip end (right)
1
SHandlebar switch (right)
2
Installation steps:
D Align the handlebar switch (right) mating sur-
face and punched mark
a
on the handlebar.
D Provide a clearance
b
of 2.5 mm between
the grip assembly
3
and handlebar grip.
Otherwise, the grip may not move.
Check the throttle grip for smooth opera-
tion.