Filter
Top Products
8-27
LIGHTING SYSTEM
ELEC
1. Bulb and bulb socket
Refer to “CHECKING SWITCHES” section.
Replace the bulb and/or bulb socket.
NO CONTINUITY
2. Voltage
S Connect the pocket tester (DC20 V) to the
bulb socket connector.
Tester (+) lead ! Blue terminal
Tester (–) lead ! Black terminal
S Turn the main switch to on.
S Turn the lights switch to on or pilot position.
S Check the voltage (12 V) on the bulb socket
connector.
CONTINUITY
1
2
MEETS
SPECIFICATION
This circuit is not faulty.
The wiring circuit from main switch to bulb
connector is faulty. Repair.
OUT OF SPECIFICATION
YP805023
4. If the auxiliary light fails to come on.