Filter
Top Products
3-23
COOLANT REPLACEMENT
INSP
ADJ
10 Nm (1.0 mSkg)
*****************************************************
5. Install:
D Gasket
1
D Drain bolt
2
6. Loosen:
D Screw
1
(carburetor bleed)
7. Connect:
D Hose (reservoir tank)
8. Fill:
D Radiator
(to specified level
1
)
Fill the coolant slowly, until the coolant
comes out from the carburetor drain
pipe.
D Reservoir tank
(to maximum level
a
)
Recommended coolant:
High quality ethylene glycol
anti-freeze containing
corrosion inhibitors for
aluminium engine.
Coolant
2
and water
3
(soft
water):
Mixed ratio: 50%/50%
Total amount:
1.4 L
Reservoir tank capacity:
0.35 L
Handling notes for coolant:
Coolant is potentially harmful and should be
handled with special care.