Filter
Top Products
8-33
1. Bulb and bulb socket
Refer to “CHECKING SWITCHES” section.
MEETS
SPECIFICATION
Replace the bulb and/or bulb socket.
NO CONTINUITY
3. Voltage
S Connect the pocket tester (DC20 V) to the
flasher relay coupler.
Tester (+) lead ! Brown terminal .
Tester (–) lead ! Frame ground
1
MEETS
SPECIFICATION
S Turn the main switch to on.
S Check for voltage (12 V) of the “Brown”
lead at the flasher relay terminal.
The wiring circuit from main switch to flasher
relay connector is faulty. Repair.
OUT OF SPECIFICATION
4. Voltage
S Connect the pocket tester (DC20 V) to the
flasher relay coupler.
Tester (+) lead !
Brown/White terminal .
Tester (–) lead ! Frame ground
1
S Turn the main switch to on.
S Check for voltage (12 V) on the “Brown/
White” lead at the flasher relay terminal.
The flasher relay is faulty. Replace.
OUT OF SPECIFICATION
CONTINUITY
:
2. Turn switch
Refer to “CHECKING SWITCHES” section.
Replace the left handlebar switch.
NO CONTINUITY
CONTINUITY
1
SIGNAL SYSTEM
ELEC
YP806023
3. If the flasher light and/or turn indicator light
fails to blink.