Filter
Top Products
7-26
FRONT FORK
CHAS
CAUTION:
2. Remove:
SInner tube
SOil lock pice
3. Remove:
SOil seal
1
Never reuse the oil seal.
2
Rag
YP703030
FRONT FORK INSPECTION
1. Inspect:
SInner tube bending
Inner tube bending limit:
0.2 mm
Scratches/bends/damage ! Replace.
Do not attempt to straighten a bent inner
tube as this may dangerously weaken the
tube.
2. Measure:
SFork spring
a
Front fork spring free length:
268.5 mm
<Wear limit>
263.5 mm
Over the specified limit ! Replace.
YP******
FRONT FORK ASSEMBLY
Reverse the “DISASSEMBLY” procedure.
Note the following points.
1. Install:
SDamper rod
1
SRebound spring
SOil lock piece
2
SInner tube
3