Filter
Top Products
7-27
FRONT FORK
CHAS
23 Nm (2.3 mSkg)
NOTE:
NOTE:
CAUTION:
2. Install:
SInner tube
1
Into outer tube
2
.
3. Install:
SPlain washer
1
SBolt (damper rod)
2
4. Tighten:
SBolt (damper rod)
1
Tighten damper rod bolt
1
while holding the
damper rod with a T-handle
2
and a damper
rod holder
3
.
Damper rod holder:
90890-04084
T-handle
90890-01326
6. Install:
SOil seal
1
SRetaining clip
SDust seal
Use the fork seal driver weight
3
and the
attachment
2
.
D Before installing the oil seal
1
, apply lithium
soap base grease onto the oil seal lips.
D Adjust the retaining clip so that it fits into the
outer tube groove.
Make sure that the oil seal numbered side
faces upward.
Fork seal driver weight:
90890-01367
Attachment:
90890-01374