Filter
Top Products
7-5
FRONT WHEEL AND BRAKE DISC
CHAS
23 Nm (2.3 mSkg)
NOTE:
NOTE:
NOTE:
CAUTION:
2. Install:
SBrake disc
1
Tighten the bolts (brake disc) in stage using a
crisscross pattern.
EB700030
FRONT WHEEL INSTALLATION
Reverse the “REMOVAL” procedure.
Note the following points.
1. Lubricate:
SFront wheel axle
SBearings
SOil seal (lips)
SDrive/driven gear (speedometer)
Recommended lubricant:
Lithium soap base grease
2. Install:
SSpeedometer gear unit
1
Make sure that the wheel hub and the
speedometer gear unit are installed with the
three projections
2
meshed into the three slots
3
.
3. Install:
SFront wheel
Make sure that the slot in the speedometer gear
unit fits over the stopper on the front fork outer
tube.
4. Tighten:
SFront wheel axle
SAxle nut (front wheel axle)
1
Before tightening the axle nut, stroke the
front fork several times to check for proper
fork operation.
Make sure that the brake hose is routed
properly.