Filter
Top Products
7-32
HANDLEBAR
CHAS
*****************************************************
*****************************************************
NOTE:
23 Nm (2.3 mSkg)
NOTE:
NOTE:
YP******
HANDLEBAR REMOVAL
1. Remove:
SGrip (Left)
Removal steps:
D Remove the grip end (left).
D Blow with compressed air between the han-
dlebar and adhesive side of the grip to re-
move.
YP704020
HANDLEBAR INSPECTION
1. Inspect:
SHandlebar
Bends/Cracks/Damage ! Replace.
Do not attempt to straighten a bent handle-
bar as this may dangerously weaken the
handlebar.
YP******
HANDLEBAR INSTALLATION
1. Install:
SHandlebar
1
D Apply a light coat of lithium soap base grease
onto the handlebar right end.
D Align the match marks
a
on the handlebar
with the lower handlebar holder upper sur-
face.
2. Install:
SUpper handlebar holder
1
The upper handlebar holders should be
installed with the arrow marks a facing forward
a
.
3. Install:
SGrip
1
SGrip end (Left)
2
Provide a clearance
a
of 2.5 mm between the
handlebar grip and handlebar grip end.