Filter
Top Products
Instruction Manual
IB-106-340 Rev. 2.4
April, 2001
Rosemount Analytical Inc. A Division of Emerson Process Management Description and Specifications 1-13
Oxymitter 4000
Table 1-1. Product Matrix (Continued)
Cont'd Code Language
1 English
2German
3 French
4 Spanish
5 Italian
Code Filtered Customer Termination
00 Specified as Part of Electronics Housing
Code Calibration Accessories
00 No Hardware
01 Calibration Gas Flowmeter and Reference Air Set
02 Intelligent Multiprobe Sequencer (Refer to Table 1-3)
XX Single Probe Sequencer - mounted to Oxymitter 4000 (Refer to Table 1-4)
Cont’d 1 00 XX Example
NOTES:
(1)
Recommended usages: High velocity particulates in flue stream, installation within 11.5 ft (3.5 m) of soot blowers or heavy salt cake buildup.
Applications: Pulverized coal, recovery boilers, lime kiln. Regardless of application, abrasive shields with support brackets are recommended
for 9 ft (2.74 m) and 12 ft (3.66 m) probe installations, particularly horizontal installations.
(2)
Where possible, specify SPS number; otherwise, provide details of the existing mounting plate as follows:
Plate with studs Bolt circle diameter, number, and arrangement of studs, stud thread, stud height above mounting plate.
Plate without studs Bolt circle diameter, number, and arrangement of holes, thread, depth of stud mounting plate with accessories.
Table 1-2. Calibration Components
Part
Number Description
1A99119G01 Two disposable calibration gas bottles — 0.4%
and 8% O
2
, balance nitrogen — 550 liters each,
includes bottle rack*
1A99119G02 Two flow regulators for calibration gas bottles
*Calibration gas bottles cannot be shipped via airfreight.
When the bottles are used with “CALIBRATION RECOMMENDED”
features, the bottles should provide 2 to 3 years of calibrations in
normal service.
1