Filter
Top Products
SECTION 10—SHROUDS AND FRAME
Pronto® Series 88 Part No. 1125075
FIGURE 10.1 Removing/Installing the Top Shroud
Removing/Installing the Side Shrouds
NOTE: For this procedure, refer to FIGURE 10.2 on page 89.
Removing
1. Remove the two screws securing the side shroud to the frame.
2. Remove the side shroud from the frame.
Installing
1. Position the side shroud onto the frame.
2. Align the shroud mounting holes with the mounting holes in the frame.
3. Secure the side shroud to the frame using the two screws. DO NOT overtighten.
Top
Shroud
Front
Shroud
Base
Frame
Hook and
Loop
Strap
Hook and
Loop Strap
Joystick Cable
and Connector
Center
Hole in
Top
Shroud
NOTE: Batteries not
shown for clarity.
DETAIL “A” - M61 TOP SHROUD
Clip