Filter
Top Products
RECOMMENDED TOOLS
Pronto® Series 2 Part No. 1125075
ƽ WARNING
A QUALIFIED TECHNICIAN MUST PERFORM ALL PROCEDURES
IN THIS SERVICE MANUAL.
DEALERS AND QUALIFIED TECHNICIANS: DO NOT SERVICE OR
OPERATE THIS EQUIPMENT WITHOUT FIRST READING AND
UNDERSTANDING (1) THE OWNER’S OPERATOR AND
MAINTENANCE MANUAL, (2) THE SERVICE MANUAL (IF
APPLICABLE) AND (3) THE SEATING SYSTEM’S MANUAL (IF
APPLICABLE). IF YOU ARE UNABLE TO UNDERSTAND THE
WARNINGS, CAUTIONS AND INSTRUCTIONS, CONTACT
INVACARE TECHNICAL SUPPORT BEFORE ATTEMPTING TO
SERVICE OR OPERATE THIS EQUIPMENT. OTHERWISE, INJURY
OR DAMAGE MAY RESULT.
RECOMMENDED TOOLS
The following tools are recommended for servicing this wheelchair:
• Invacare Power Mobility Field Service Kit - p/n 1125222
• 5mm ball head 10-inch t-handle allen wrench
• Flat tip screwdriver
• ½-inch deep socket and 3/8-inch ratchet
• Small and Medium Phillips
®
screwdriver
• Needle nose pliers
• Wire cutters
• Tie-wrap assortment
• Dead blow hammer
• ¼-inch to ½-inch wrenches
REFERENCE DOCUMENTS
DOCUMENT PART NUMBER
M50/51/61 Owner’s Manual 1125085
MK5™NX™Electronics Manual 1110532
Quad-Link Instruction Sheet (for assemblies after 4/6/06) 1134844
MK6i™Field Reference Guide 1141471
MK6i Service Manual 1143203
NOTE: Updated versions of this manual are available on www.invacare.com.