Filter
Top Products
SECTION 4—WHEELCHAIR OPERATION
Part No. 1125075 37 Pronto® Series
M50/M51 Wheelchairs Manufactured After 8/14/05 and All M61
Wheelchairs
NOTE: For this procedure, refer to
FIGURE 4.7.
1. Press the horn button located in the
center of the speed indicator. The horn
will sound for as long as the button is
pressed.
FIGURE 4.7 Using the Horn - M50/M51
Wheelchairs Manufactured After 8/14/05 and
All M61 Wheelchairs
Elevating the Seat
ƽ WARNING
DO NOT operate wheelchair on an incline while in an elevated position. Otherwise,
the wheelchair may tip over and injury or damage may occur.
DO NOT operate the elevate function near or under a fixed object such as a table
or desk.
Use only the MK5™NX w/ACC or MK660 w/ACC controller to activate the elevate
function. DO NOT use any other actuator controls. Such devices may result in
excess heating and cause damage to the actuator and associated wiring and could
cause a fire, death, physical injury or property damage. If such devices are used,
Invacare shall not be liable and the limited warranty is void.
The elevated seat option is equipped with a speed reduction safety mechanism.
While the seat is in an elevated position, the safety feature slows the speed of the
wheelchair by 80%. If the wheelchair operates at maximum speed while in an
elevated position, DO NOT operate the wheelchair. Have the wheelchair serviced
IMMEDIATELY by a qualified technician.
Horn
Button
NOTE: SPJ+
w/ACC joystick
shown. SPJ+
joystick works
the same way.