Filter
Top Products
SECTION 5—ARMS
Part No. 1125075 45 Pronto® Series
FIGURE 5.1 Removing/Installing Van Seat Arm and Adjusting Van Seat Arm Width
Adjusting Van Seat Arm Angle
ƽ WARNING
Pinch point may occur when adjusting the arm angle position.
NOTE: For this procedure, refer to FIGURE 5.2 on page 46.
1. Lift-up the armrest.
2. Loosen the jam nut.
3. Adjust the socket screw up or down to the desired arm angle position.
4. Tighten the jam nut.
5. To determine the same angle for the opposite armrest, count the exposed threads after
the jam nut has been tightened.
6. Repeat STEPS 1-5 for opposite armrest, if necessary.
Adjusting Van Seat Arm Height (Adjustable Height
Arms Only)
NOTE: For this procedure, refer to FIGURE 5.2 on page 46.
1. Remove the lock knob that secures the armrest to the arm frame assembly.
2. Adjust the armrest to one of five positions in 1-inch increments.
3. Reinstall the lock knob that secures the armrest to the arm frame assembly and tighten
securely.
Lock
Knob(s)
Arm Support
Tube
Adjustable Width Arm