Filter
Top Products
SECTION 4—WHEELCHAIR OPERATION
Pronto® Series 38 Part No. 1125075
NOTE: For this procedure, refer to FIGURE 4.8.
NOTE: This procedure applies to M61 wheelchairs only.
1. Make sure the wheelchair is on a level surface.
2. Press the mode button to switch from driving mode to elevate mode.
NOTE: The LED will light up with a circle around it.
3. Move the joystick:
• Forward - Elevates the seat.
• Backward - Lowers the seat.
FIGURE 4.8 Elevating the Seat
Mode
Button
Elevate
the Seat
Lower
the Seat
Joystick
Elevated Seat
Selected
Drive
Mode