Filter
Top Products
SECTION 5—ARMS
Part No. 1125075 47 Pronto® Series
Removing/Installing Flip Back Armrest
ƽ WARNING
Make sure the flip back armrest release levers and height adjustment levers are in
the locked position before using the wheelchair.
NOTE: For this procedure, refer to FIGURE 5.4.
NOTE: Flip back armrest release lever MUST be in unlocked position when placing armrest into
the arm sockets.
NOTE: Reverse this procedure to install the flip back armrest.
1. If necessary, disconnect the joystick. Disconnecting/Connecting the Joystick
on
page 123.
2. Unlock flip back armrest by pulling flip back armrest release lever into the unlocked
(horizontal) position.
3. Remove quick release pin securing the flip back armrest to the wheelchair frame.
4. Pull up on the flip back armrest and remove the armrest from the arm sockets.
5. Repeat STEPS 1-4 for the opposite flip back armrest, if necessary.
FIGURE 5.4 Removing/Installing Flip Back Armrest
Flip Back Armrest
Rear Arm Socket
Quick Release Pin
Front Arm Socket
Seat Frame
Flip Back Armrest Release Lever
Locked
(Vertical)
Unlocked
(Horizontal)