Filter
Top Products
SECTION 8—FRONT RIGGINGS/FOOTBOARD
Pronto® Series 78 Part No. 1125075
3. Secure telescoping front rigging at desired depth with existing two mounting screws,
spacers, and locknuts. Securely tighten.
NOTE: The two telescoping front rigging supports can be positioned at different depths.
FIGURE 8.7 Adjusting/Replacing Telescoping Front Rigging Supports
Removing/Installing the Footboard Assembly
ƽ WARNING
Pinch point may occur when rotating the footboard assembly.
NOTE: For this procedure, refer to FIGURE 8.8 on page 79.
Removing
1. Remove the quick release pin that secures the footboard assembly to the wheelchair
frame by depressing the button while sliding the pin out.
2. Remove the footboard assembly from the wheelchair frame.
Spacer
Telescoping Front
Rigging Support
Locknut
Mounting
Screws
Locknut
Spacer
Seat
Frame
Depth Mounting
Positions
Depth Mounting
Positions