Filter
Top Products
SECTION 4—WHEELCHAIR OPERATION
Part No. 1125075 35 Pronto® Series
Adjusting the Speed
M50 and M51 Wheelchairs Manufactured Before 8/15/05
NOTE: For this procedure, refer to FIGURE 4.4.
1. Turn the speed control knob to adjust
the speed:
• Clockwise - Increase speed.
• Counterclockwise - Decrease speed.
FIGURE 4.4 Adjusting the Speed - M50 and
M51 Wheelchairs Manufactured Before
8/15/05
M50/M51 Wheelchairs Manufactured After 8/14/05 and All M61
Wheelchairs
NOTE: For this procedure, refer to FIGURE 4.5 on page 36.
1. Perform one of the following:
• Adjust Speed in 20% Increments (5 Speed Mode) - Press the tortoise button ( )
or hare button ( ) to decrease/increase the speed in 20% increments. The larger
bars in the speedometer will light.
• Adjust Speed in Smaller Increments (VSP Mode) - Perform the following steps:
i. Press and hold both the tortoise button ( ) and hare button ( ) until the
joystick beeps.
ii. Perform one of the following:
• Press the tortoise button ( ) or hare button ( ) to decrease/increase the
speed in 20% increments. The larger bars in the speedometer will light.
• Press and hold the tortoise button ( ) or hare button ( ) to
decrease/increase the speed in smaller increments. The smaller bars in the
speedometer will light.
Speed
Control
Knob