Filter
Top Products
SECTION 13—ELECTRONICS
Part No. 1125075 121 Pronto® Series
FIGURE 13.1 Removing/Installing the Joystick
Repositioning the Joystick Mounting Bracket
Van Seat
NOTE: For this procedure, refer to FIGURE 13.2 on page 122.
NOTE: Take note of position and orientation of mounting hardware for reinstalling the joystick
assembly.
1. Turn the adjustment lock lever to release the joystick mounting tube from the
mounting bracket.
2. Remove the joystick from the wheelchair.
3. Remove the three hex mounting screws, spacers and locknuts that secure the
mounting bracket to the three mounting holes on the arm frame.
NOTE: The mounting bracket is mounted to the inside of the arm frame.
4. Reposition the mounting bracket on the opposite arm frame.
Joystick
Joystick
Mounting
Tube
Mounting
Screws
Mounting Bracket and
Adjustment Lock Lever
Office Style Seat
Standard
Arm
Joystick
Office Style Seat
Joystick Cable
Tie-Wrap Here
Tie-Wrap Here
Standard
Arm
DETAIL “A” - TIE-WRAP
LOCATIONS