Filter
Top Products
SECTION 7—ASBA SEAT
Pronto® Series 64 Part No. 1125075
FIGURE 7.4 Removing/Installing the Seat Pan
Adjusting the Seat Width
The ASBA seat width cannot be adjusted and the seat frame must be replaced to achieve
a change in seat width for the user. Refer to Removing/Installing the Seat Pan on page 63.
Removing/Installing the Seat Frame
NOTE: For this procedure, refer to FIGURE 7.5 on page 65.
Removing
1. Remove the accessories installed in the accessory tube. Refer to Accessories on
page 128.
2. Remove the arms. Refer to Removing/Installing Flip Back Armrest
on page 47.
3. Remove the four hex screws and locknuts securing the seat frame to the seat frame
plate.
4. Remove the seat frame from the seat frame plate.
Installing
1. Position the seat frame onto the seat frame plate.
2. Secure the seat frame to the seat frame plate using the four hex screws and locknuts.
Torque to 13 ft-lbs.
3. Install the arms. Refer to Removing/Installing Flip Back Armrest
on page 47.
Seat Pan
Seat Frame
Seat
Positioning
Strap
Locknut
Quick Release Pin
Mounting Screws
Tab
Locknut
Spacer