Filter
Top Products
SECTION 6—VAN SEAT
Part No. 1125075 53 Pronto® Series
Adjusting the Seat Height
M50/M51 Wheelchairs
NOTE: For this procedure, refer to FIGURE 6.6.
NOTE: The seat can be adjusted to five height positions in 1-inch increments.
1. Remove the seat. Refer to Removing/Installing the Seat Assembly on page 50.
2. Remove the mounting screw that secures the seat post to the support tube.
ƽ WARNING
Refer to the table in FIGURE 6.8 on page 57 for proper seat post mounting
positions. For users over 220 lbs - Mounting holes 3, 4 and 5 (in FIGURE 6.6) MUST
be used with the seat in the 1-inch back position (FIGURE 6.8). Refer to Adjusting
Seat Position on Seat Base on page 56.
3. Adjust the seat post to desired mounting position.
4. Reinstall mounting screw. Securely tighten.
5. Reinstall the seat. Refer to Removing/Installing the Seat Assembly on page 50.
FIGURE 6.6 Adjusting the Seat Height - M50/M51 Wheelchairs
Mounting Screw
Seat Post
Support Tube
Mounting Positions
NOTE: Batteries and shrouds
not shown for clarity.
1
2
3
4
5