Filter
Top Products
SECTION 7—COMPRESSOR
Part No 1110538 47 Platinum™Series
2. Turn the valve plate assembly over.
CAUTION
When removing the old O-ring gaskets ensure not to damage the grooves they sit in.
3. Using a small screwdriver, remove the old O-ring gaskets from the valve plate assembly.
FIGURE 7.12 Removing the Old O-Ring Gaskets
4. Using a ¼-inch socket or nut driver, remove the screw, the valve retainer and intake
valves from the valve plate assembly.
FIGURE 7.13 Removing the Intake Valves
5. Turn the valve plate assembly over.
6. Using a ¼-inch socket or nut driver, remove the screw, old exhaust valves and limiters
of the valve plate chambers.
O-Ring Gaskets
Valve Plate
Assembly
Valve Plate
Assembly
¼-inch Socket or
Nut Driver
Intake Valves
Screw
Valve
Retainer