Filter
Top Products
SECTION 7—COMPRESSOR
Part No 1110538 37 Platinum™Series
Rebuilding the Thomas Model 2650 and 2660
Compressor - Platinum 5 and 10 Models
ƽ DANGER
To prevent electrical shock, ALWAYS disconnect concentrator from electrical
outlet before servicing.
NOTE: Platinum XL uses a Gast compressor. Refer to Platinum XL Model - Rebuilding the Gast
Compressor on page 45.
NOTE: Both compressor versions (models 2650 and 2660) use kit p/n 1109235.
NOTE: This kit is designed for rebuilding the Thomas Model 2650 and 2660 Series compressor.
The model number is located on the front of the compressor. Compressor numbers for this kit are
2650CE37, 2650CE44, 2660CE37, and 2660CE50. If the compressor has a different model number
than those listed, this kit will not work.
The Thomas 2650 and 2660 Series Compressor Rebuild Kit (p/n 1109235) contains the
following: DESCRIPTION QUANTITY
Tools Required:
• Torque wrench that has an inch-pound scale (for head screws, set screws, flapper
valve screw, and pipe plugs)
•Torx
®
T-25 drive for torque wrench (for head screws)
• Torx T-27 drive for torque wrench (for retainer screws)
• 1/8-inch Allen wrench attachment for torque wrench (for eccentric set screw)
• 5/32-inch Allen wrench attachment for torque wrench
• Flat blade screwdriver attachment or 1/4-inch hex socket for torque wrench (for
flapper valve screw)
• Two flat blade screwdrivers
DESCRIPTION QUANTITY
Teflon®Piston Cups 2
Aluminum Piston Sleeves 2
Flapper Valves - Intake and Exhaust 4
Valve Keepers 4
O-Ring - Sleeve 2
Valve Plate Gaskets 2
Head Mounting Screws 8
Valve Screws 4
Valve Restraints 2
Piston Cup Retainer Screws 2