SECTION 7—COMPRESSOR
Part No 1110538 35 Platinum™Series
FIGURE 7.2 Replacing Compressor Assembly - Platinum 5 and 10 Models with Throttling
Muffler
Replacing Capacitor
5-Liter Models (Platinum 5 and Platinum XL)
NOTE: For this procedure, refer to Detail “A” in FIGURE 7.3 on page 36.
1. Unplug the unit.
2. Remove the cabinet. Refer to Removing Cabinet
on page 25.
3. Remove protective boot to reveal capacitor wires.
Platinum 5 and 10 models are
equipped with Thomas Compressors
Platinum 5 XL model is equipped
with Gast Compressor
Intake Hose
Mounting
Screws
Compressor
Restraint Bracket
Compressor
Output Hose
(BLUE)
Grommet
Wire Clamps or
Tie-wraps
Capacitor
Protective Boot
NOTE: Models with throttling muffler
manufactured after 7/24/03.