Filter
Top Products
SECTION 20—4-WAY VALVE
Platinum™Series 78 Part No 1110538
13. Cut the tie-wraps that secure the Y-tube muffler assembly to the manifold assembly.
14. Remove the Y-tube muffler assembly from the manifold assembly. Use a screwdriver
to disengage the tubing connection at the barbed fitting while pulling the tubing away
from the manifold assembly.
FIGURE 20.3 Replacing Manifold Assembly (Units Manufactured after 7/24/03)
Tie-Wraps
Sieve Bed Hoses
Spade Connectors
Valve Pilot
Manifold Assembly
Adjustable
Clamp
Compressor Output
Hose (BLUE)
Heat Exchanger
NOTE: New Heat Exchanger
does not have fins.
Mounting
Screw
Sound Box
Top
Bushing
(Two [2]
per side)
DETAIL “A” -
MANIFOLD ASSEMBLY
Adjustment Clamp
Valve Manifold Input
Hose
Bottom Center Port
4-Way Valve
NOTE: Manifold assembly
shown is for 10 liter models.
Y-tube Muffler Assembly
Muffler
without
Throttling
Insert
Tie-Wrap