Filter
Top Products
Teledyne API T802 Paramagnetic O
2
Analyzer Operation Manual
83
5.7. SETUP MORE COMM: COMMUNICATION PORTS
This section introduces the communications setup menu; Section 6 provides the
setup instructions and operation information. To arrive at the communications
menu, press SETUP>MORE>COMM.
5.7.1. ID (MACHINE IDENTIFICATION)
Each type of Teledyne API’s analyzer is configured with a default ID code. The
default ID code for the T802 analyzers is typically 802, but could also be “0”.
The ID number is only important if more than one analyzer is connected to the
same communications channel such as when several analyzers are:
on the same Ethernet LAN (Section 6.5.1)
in an RS-232
m
ultidrop chain (Section 3.3.1.8)
when apply
ing MODBUS protocol (Section 6.5.1).
when apply
ing HESSEN protocol (Section 6.5.2)
If two analyzers of the s
ame model type are used on one channel, the ID codes of
one or both of the instruments needs to be changed.
07275B DCN6418