Filter
Top Products
Models T802, 802E Appendix A Menu Trees (Reference: 06530C DCN6418) Appendix A
Error! Unknown document property name.Error! Unknown document property name. A-5
SETUP
PASS
DAS RNGE
CLK
MOREACALCFG
SAMPLE
1
Editing an existing DAS channel will erase any
data stored on the channel
options.
2
Changing the event for an existing DAS channel
DOES NOT erase the data stored on the
channel.
ACAL is a special configuration; consult factory.
EDITVIEW
PREV NEXT
CONC
PNUMTC
CALDAT
FAST
DETAIL
Selects the data point to be viewed
Cycles through
parameters assigned
to this DAS channel
<PRM
PRM>NX10NEXTPREVPV10
EDIT
1
PRNTDELINSNEXTPREV
ENTER PASSWORD: 818
NO
NX10NEXTSET><SET
YES
NAME
EVENT
PARAMETERS
NUMBER OF RECORDS
REPORT PERIOD
RS-232 REPORT
CAL MODE
CHANNEL ENABLE
ON
OFF
NO
YES
1
Sets the maximum number of
records recorded by this channel
Sets the time lapse between
each report
Create/edit the name of the channel
PREV NEXT
Cycles through list
of available trigger
events
2
NOYES
1
EDIT
1
PRNTDELINSNEXTPREV
NO
PRNTEDITSET><SET
YES
Cycles through list of
currently active
parameters for this
channel
MAXMINAVGINST
PRECISIONSAMPLE MODEPARAMETER
Cycles through list of available &
currently active parameters for this
channel
NEXTPREV
VIEW
CONC
PNUMTC
CALDAT
FAST
DETAIL
Figure A-4: Primary Setup Menu
(DAS)
07275B DCN6418