Filter
Top Products
Basic Operation Teledyne API T802 Paramagnetic O
2
Analyzer Operation Manual
68
4.4.2. SECONDARY SETUP MENU (SETUP>MORE)
Table 6-5: Secondary Setup Mode Features and Functions
MODE OR FEATURE
MENU
ITEM
DESCRIPTION
MANUAL
SECTION
External Communication
Channel Configuration
COM
Used to set up and operate the analyzer’s various external I/O
channels including RS-232, RS-485, modem communication
and/or Ethernet access.
5.7
System Status Variables
VARS
Used to view various variables related to the instruments current
operational status
Changes made to any variable will not be recorded in the
instrument’s memory until the ENTR key is pressed.
Pressing the EXIT key ignores the new setting.
5.8
System Diagnostic Features
and
Analog Output Configuration
DIAG
Used to access a variety of functions that configure, test or
diagnose problems with a variety of the analyzer’s basic
systems.
Most notably, the menus to configure the output signals
generated by the instruments Analog outputs, are located here.
5.9
Alarm Limit Configuration
1
ALRM
Used to turn the instrument’s two alarms on and off as well as
set the trigger limits for each.
5.10
1
Alarm warnings only present when optional concentration alarm relay package is installed.
07275B DCN6418