Milestone XProtect Smart Client 3.0; User’s Manual
www.milestonesys.com Page 89 Day-to-Day Use
Note: When using the following shortcuts, do not actually press the + key. When listing keyboard
shortcuts, the + is used to indicate “and then press.” Example: For the keyboard shortcut
/+ENTER, you should thus only press the / key, then the ENTER key.
ENTER Toggles maximized/regular display of the selected view position.
Example:
View position in regular (left) and maximized (right)
state. Note that the selected view position is always
highlighted by a lighter blue top bar.
/+<camera
shortcut
number>+ENTER
Lets you change the camera displayed in the selected view position to the
camera with the matching shortcut number.
Example: If the required camera has the shortcut number 6, you would press
/+6+ENTER.
Note that camera shortcut numbers may not necessarily be used on your
surveillance system. Camera shortcut numbers are defined on the
surveillance system server; ask your surveillance system administrator if in
doubt.
/+ENTER Changes the camera displayed in the selected view position to the position’s
default camera.
/+/+ENTER Changes the cameras displayed in all view positions to the positions’ default
cameras.
*+<view shortcut
number>+ENTER
Changes the selected view to the view with the matching shortcut number.
Example: if the required view has the shortcut number 8, you would press
*+8+ENTER.
Note that view shortcut numbers may not necessarily be used. If view
shortcut numbers are used, you will be able to see them in the Views
section, where they will appear in brackets before the views’ names:
View shortcut numbers are defined on the Smart Client’s Setup tab; ask your
surveillance system administrator if in doubt.
6 (numeric
keypad only)
Moves the view position selection one step to the right.
Example:
