Milestone XProtect Smart Client 3.0; User’s Manual
www.milestonesys.com Page 56 Day-to-Day Use
Matrix: Only available for single-camera view positions, not for hotspots or carousels. Only
available if Milestone XProtect Matrix (an integrated product for distributed viewing of live
video streams) has been configured on your surveillance system.
Lets you send images from the selected camera to a particular Matrix Monitor.
Note that the Matrix command is not available if viewing the camera in a hotspot or a
carousel.
Example: Sending a camera’s images to a
Matrix Monitor through the shortcut menu
Send Camera: Only available for single-camera view positions, not for hotspots, carousels,
or Matrix positions.
Lets you send images from the selected camera position to another single-camera position
in an open view, including any views you may have open in floating windows or on
secondary displays.
To use this command, first select the required destination view in the first submenu, then
select the required camera position in the second submenu.
Example: Sending a camera’s images to another camera position
If some of the positions listed on the second submenu are not selectable (as is the case in
our example illustration), it is because the positions are either not in use or used for
hotspots, carousels, or Matrix content.
Carousels
A carousel is used for displaying images from several cameras, one after the other, in a single view
position.
If a position in one of your views contains a carousel, you will
be able to recognize it by the following characteristics:
It displays images from different cameras, one after
the other
It is surrounded by a thin green border
As with other images, you can enlarge images from a carousel
by double-clicking the blue image bar above the image.
Carousels are configured on the Smart Client’s Setup tab.
